CBCB-LHN Cartridge Sun Hydraulics
Sun Counterbalance Valve T-11A Cavity 1.5:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-17A Cavity 3:1 pilot ratio, vented counterbalance valve - atmospherically referenced
Certificados en SSL tus compras están protegidas
Envíos a $65 en Nuevo Leon. Enviamos a toda la República Mexicana por FedEx desde $115.
Todos tus pedidos serán facturados, somos una empresa formalmente constituida.
¿Dudas, Producto Especial? Tenemos la solución raíz ¡Cotiza con nosotros! Ventas@Traser.com.mx
Atmospherically vented counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Backpressure at port 2 does not affect the valve setting because the spring chamber is atmospherically referenced. Other names for this valve include motion control valve and over-center valve. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Turn adjustment clockwise to decrease setting and release load. Full clockwise setting is 200 psi (14 bar). Approximately 1 drop (0,07 cc) of fluid will pass from the pilot area to the vented spring chamber every 4000 cycles. Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages. Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit. This valve has positive seals between all ports. With vented valves, a lower pilot ratio may be required to achieve machine stability compared to non-vented valves. Three-port vented valves are atmospherically referenced and considered problem solvers for existing circuits using non-vented valves. Over time, the vented valves may leak externally or allow moisture into the spring chamber. Four-port vented counterbalance valves are recommended for new applications. All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size). Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Referencias Específicas
No customer reviews for the moment.
Sun Counterbalance Valve T-11A Cavity 1.5:1 pilot ratio, standard capacity counterbalance valve
Sun Pilot Check Valve T-11A Cavity Pilot-to-open check valve with sealed pilot
Sun Counterbalance Valve T-11A Cavity 3:1 pilot ratio, standard capacity counterbalance valve
Sun Pilot Check Valve T-11A Cavity Vented pilot-to-open check valve - atmospherically referenced
Sun Pilot Check Valve T-11A Cavity Pilot-to-open check valve with standard pilot
Sun Counterbalance Valve T-2A Cavity 3:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-11A Cavity 3:1 pilot ratio, standard capacity counterbalance valve
Sun Pilot Check Valve T-11A Cavity Pilot-to-open check valve with standard pilot
Sun Pilot Check Valve T-2A Cavity Pilot-to-open check valve with standard pilot and Delrin seat
Sun Counterbalance Valve T-2A Cavity 2:1 pilot ratio, vented counterbalance valve - atmospherically referenced
Sun Counterbalance Valve T-19A Cavity 3:1 pilot ratio, vented counterbalance valve - atmospherically referenced
Sun Counterbalance Valve T-11A Cavity 3:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-17A Cavity 3:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-2A Cavity 4.5:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-2A Cavity 4.5:1 pilot ratio, standard capacity counterbalance valve
Sun Counterbalance Valve T-19A Cavity 10:1 pilot ratio, standard capacity counterbalance valve